BTP Abadi – The easy method of maintaining a water pump so that it is always everlasting and strong and capable of being able to carry out the maximum duty requires proper treatment starting from the technical installation of the suitable method to the correct action throughout its use.
Sourced from the type of water pump parts that are available, each has a technical comparison in the effort to maintain the water pump, starting from the placement of pump parts to facilitate regular maintenance, up to light action when there are serious problems such as exchanging equipment (spare parts) to the very severe is the exchange of the water pump part itself.
Create the type of jet pump or double jet which is usually the position of the engine pump is located on the plain, so that maintenance procedures that can be tried are categorized easier. Supervision of all the characteristics of the destruction of the water pump can also be monitored more often starting from the sound of the motor moderate, the water discharge obtained, or the situation of the pump body that needs to be cleaned.
In an effort to maintain this type of water pump, it only requires measures and actions that protect the safety of the pump body itself starting from protecting cleanliness, protection from close areas, weather, or installation of pipes and electricity properly installed.
Which is very commonly intertwined and requires attention to the maintenance of this type of pump is a regular check whether the engine body is maintained from dirt or rust, whether the position of the cooling fan can get a good air cycle, and make sure there is no sound abnormal motor rotation (dynamo ) water pump.
Create a submersible water pump type which technically must be located in the source hole and flooded, it is indeed not allowed to be tried more often because the process is quite far and heavy. Just if your power source hole is 60 m with a submersible pump, it has certainly would require extra power and duration for transporting the pump because the weight of the pipe must also be taken into account.
But to protect the ability of the pumping machine can be maximum, once in a while it is indeed necessary to try checking to justify the engine body situation starting from the motor and the suction fan is always in top condition. Maintaining submersible water pumps is indeed a lot of pay, when before you finish to transport the pump parts that are only just for maintaining or cleaning it, but if indeed there is a breakdown, you should first check the water discharge issued. Is there a depreciation from fair debit? When it is good, of course you do not need to check the pump engine.
Relying on the water discharge proves that shrinkage is very important, you need to suspect if something has been entwined at the base of the water or problems at the pump. Hurry up and carry out the action of transporting the pump just before the unfavorable thing which is more severe intertwined.
